uthorization:
Login:
Password:
  















 

Detailed information

 

MATHEMATICAL MODEL OF JET PUMP OPERATION IN TANDEM OIL WELL PUMPING UNIT



Usability of tandem pumping units in in-situ leaching technology of uranium production is justified. The proposed tandem scheme is advantageous for reduction in load on electric submersible pump and for feasible considerable increase in productivity of uranium-pregnant solution pumping. The tandem pump is less sensitive towards different dynamic conditions, operates effectively even when pregnant solution contains sand fraction, and has higher performance index. The studies used analytical and experimental calculation methods. As a result, based on the Bernoulli equation, the mathematical model is constructed for operation of jet pumps and its key elements: high-pressure nozzle, receiving chamber, mixing chamber and diffuser. The modeling procedure for joint operation of electric submersible and jet pumps allows prompt and sufficiently accurate selection of optimal design parameters of jet pump for the tandem pumping unit operation in specific real condition of wells with different dynamic fluid levels, as well as determination of performance index, optimized ejection coefficient and cavitation-free mode. Recommendations on jet pump design are given.


For citation:  Myrzakhmetov B. ., Krupnik L. ., Sultabayev . E., Toktamissova S. . Mathematical model of jet pump operation in tandem oil well pumping unit. MIAB. Mining Inf. Anal. Bull. 2019;(8):123-135. [In Russ]. DOI: 10.25018/0236-1493-2019-08-0-123-135.



: 8
2019
ISBN: 0236-1493
: 621.694.3
DOI: 10.25018/0236-1493-2019-08-0-123-135
Authors: Myrzakhmetov B. ., Krupnik L. ., Sultabayev . E., Toktamissova S. .

Authors' Information:
B.. Myrzakhmetov, Cand. Sci. (Eng.), Assistant Professor,
L.. Krupnik, Dr. Sci. (Eng.), Professor,
.E. Sultabayev, Researcher;
S.. Toktamissova, Researcher,
e-mail: salta.mahmood@gmail.com,
O.A. Baykonurov Mining and Metallurgy Institute,
K.I. Satpayev Kazakh National Research Technical University,
050013, lmaty, azakhstan.
Corresponding author: S.. Toktamissova, e-mail: salta.mahmood@gmail.com.

Key words:
Model, jet pump, electric submersible pump, well, nozzle, diffuser, uranium production, tandem pumping unit.

References:

1. Hassan M. Badr, Wael H. Ahmed. Common Problems in Centrifugal Pumps. Pumping Machinery Theory and Practice, 2014, chap. 5. DOI 10.1002/9781118932094 https://onlinelibrary.wiley.com/doi/10.1002/9781118932094.ch5.


2. Shmidt A. A. Povyshenie effektivnosti ekspluatatsii skvazhin, oslozhnennykh soderzhaniem mekhprimesey v produktsii [Improving the efficiency of operation of wells, complicated by the content of solids in products], Candidate’s thesis, Ufa, 2007, 25 p.


3. Smol'nikov S. V. Metody zashchity nasosnogo oborudovaniya dlya dobychi nefti ot mekhanicheskikh primesey [Methods of protection of pumping equipment for oil extraction from mechanical impurities], Ufa, Neftegazovoe delo, 2010, 41 p.


4. Shashkin M. A. Primenyaemye v TPP «Langepasneftegaz» metody zashchity dlya snizheniya negativnogo vliyaniya mekhanicheskikh primesei na rabotu GNO. Inzhenernaya praktika. 2010, no 2, pp. 26—31. [In Russ].


5. Kazakov D. P. Povyshenie effektivnosti ekspluatatsii skvazhin elektrotsentrobezhnymi nasosami posle gidravlicheskogo razryva plasta [Improving the efficiency of well operation by electric centrifugal pumps after hydraulic fracturing], Candidate’s thesis, Ufa, 2010, 26 p.


6. Sherstyuk A. N., Annikova Yu. N., Ermolaeva T. A. Mode of operation of a submersible centrifugal pump for oil production. Khimicheskoe i neftegazovoe mashinostroenie. 2005, no 8, pp. 18—20. [In Russ].


7. Sokolov E. Ya., Zinger N. L. Struynye apparaty [Jet apparatus], Moscow, Energoatomizdat, 1989, 352 p.


8. Mishchenko I. T., Gumerskiy Kh. Kh., Mar'enko V. P. Struynye nasosy dlya dobychi nefti [Jet Pumps for Oil Production], Moscow, Neft' i gaz, 1996, 150 p.


9. Atnabaev Z. M. Sovershenstvovanie ekspluatatsii skvazhin ustanovkami elektrotsentrobezhnykh nasosov s ezhektorami na mestorozhdeniyakh Zapadnoy Sibiri [Improving the operation of wells by electric centrifugal pumps with ejectors in the fields of Western Siberia], Candidate’s thesis, Ufa, 2007, 106 p.


10. Valeev M. D., Bortnikov A. E., Popova L. Z., Vedernikov V. L. Justification and basic conditions for the transfer of wells for simultaneous-separate operation. Neftyanoe khozyaystvo. 2011, no 8, pp. 64—67. [In Russ].


11. Verbitskiy V. S., Grekhov I. V., Den'gaev A. V. Field studies of the Tandem pumping and ejector systems at Yuganskneftegaz. Neftyanoe khozyaystvo. 2005, no 2, pp. 96—99. http:// naukarus.com/promyslovye-issledovaniya-nasosno-ezhektornyh-sistem-tandem-v-oao-yuganskneftegaz. [In Russ].


12. Drozdov A. N., Verbitskiy V. S., Den'gaev A. V. Submersible pumps and pump-ejector systems — new opportunities in oil and gas production, oil recovery and oil and gas recovery. Vestnik NK «YUKOS». 2004, no 10, pp. 3—9. [In Russ].


13. Girgidov A. D. Efficiencies of Jet Pumps. Power Technology and Engineering, 2015, Vol. 48, Issue 5, pp. 366–370. https://link.springer.com/article/10.1007/s10749-015-0535-0.


14. Grupping A. W., Coppes J. L. R., Groot J. G. Fundamentals of Oilwell Jet Pumping. SPE Production Engineering, 1988, no 3(1). . 9—14. DOI: 10-2118/15670-PA.


15. Pomazkova Z. S. Raschet struynykh nasosov k ustanovkam dlya neftyanykh skvazhin [Calculation of jet pumps to installations for oil wells], Moscow, TSBTI, 1961, 66 p.


16. Kulak A. P., SHestozub A. B., Korobov V. I. Approximate calculation of jet pumps. Prikladna gidromekhanika. 2011. Vol. 13, no 1, pp. 29—34. ocplayer.ru/41985988-Priblizhennyy-raschetstruynyh- nasosov.html


17. Olumayowa T. Kajero, Rex B. Thorpe, Yuan Yao, David Shan Hill Wong, Tao Chen. Meta- Model-Based Calibration and Sensitivity Studies of Computational Fluid Dynamics Simulation of Jet Pumps. Chemical engineering and technology, 2017, Vol. 40, Issue 9, pp. 1674—1684. https://doi.org/10.1002/ceat.201600477


18. Michael Teti, Jan K. Spelt, Marcello Papini. Jet properties and mixing chamber flow in a high-pressure abrasive slurry jet: part II—machining rates and CFD modeling. The International Journal of Advanced Manufacturing Technology, 2019, Vol. 101, Issue 9—12, pp. 3021—3034. https://link.springer.com/article/10.1007/s00170-018-3041-3.


19. Spiridonov E. K. The calculation of the jet pump for hydraulic drainage and emptying tanks. Khimicheskoe i neftegazovoe mashinostroenie. 2005, no 1, pp. 21—25. [In Russ].


20. Karassik I. J., Messina J. P., Cooper P., Heald C. C. Pump Handbook. New York: McGraw- Hill, 2007. 3 edition.


21. Cunningham R. G. Jet Pump Theory and Performance with Fluids of High Viscosity. Proc. ASME (1957) 79. 1807—20.


Back
Site map